Brio Action stain remover 1lt.

BRIO ACTION is an interior cleaner for floors and joints. Its use is recommended for marble, granite, clay, stoneware and cement floors. Ideal for removing dirt resistant to everyday cleaning, old organic dirt, mold or contamination. 

Remove loose dirt from the surface with the help of a broom or brush. Apply the product on the surface to be treated with a brush or sponge.The product layer that covers the surface must be at least 1 mm. Let the product act with the surface to be cleaned for a variable time depending of the amount of dirt that is. It is advisable to leave the product between 30 and 60 minutes at 20ºC for very dirty surfaces. For less dirty surfaces or with higher temperatures, reduce the application time to avoid drying the product. 

During this time the disinfecting effect is carried out on the surface. Rinse with water. Depending on the surface finish (smooth or rough) and the amount of dirt (mold, organic remains, etc.), it is recommended to use a brush during rinsing. It can also be used with an automatic polishing machine. In case of difficult dirt, repeat the application following the same steps. 

On some polished or delicate materials such as Onyx, the product may cause opacity. It is recommended to test the product in an inconspicuous area to ensure that the shine of the stone is not lost, application times etc.