OTTOVAC MANUAL SUCTION CUP
Ref. 50/OTTOVACThe OTTOVAC Manual Vacuum Lifter is a portable, battery-powered, electric vacuum lifting device intended for lifting and moving any material that has a smooth, flat, non-porous surface. OTTOVAC has a built-in pressure sensor with an automatic start/stop function. When the vacuum at the base of the pad reaches -55 kPa, the pump will automatically stop after a delay of three seconds. When the vacuum level falls below -55 kPa, the pump automatically restarts, reaching the required pressure during operation.
Specifications: Applicable surface type Peak/valley heights less than 0.1” (3mm), arc less than 5°M / Batterie --> AA 1.5V Alkaline Battery (x4) / Working voltage --> 6V / Rated power --> 6W / Duty cycle --> 1500 ON-OFF cycles of 10 seconds / Lifespan --> > 10000 times, > 800h / Nominal air flow --> 4 l/min / Maximum vacuum rate --> -0.7 bar (-70 kPa) / Maximum lift capacity --> 200 kg (440 lb) / Dimensions --> 200x200x90mm / Net weight (with battery) --> 1.2 kg (2.6 lbs) / Working temperature --> 0-60°C (32-140°F)
Delivery term: From 5 to 7 days
- Safe buy
- Tracking
- Transport
OTHER PRODUCTS
-
Portable and digital Grabo PRO 385,00€ VAT NOT INCLUDEDAdd -
Stone carry clamp Compact 210 INSEMAC 140,00€ VAT NOT INCLUDEDAdd -
GRABO MANUAL ALUMINUM BAR 2.3 meters 60,00€ VAT NOT INCLUDEDAdd -
Portable and electric Grabo suction cup Before 240,00€ 220,00€ VAT NOT INCLUDEDAdd